Autonomous instruments for measurement in one or two coordinate directions of inside dimensions, outside, step, height, depth and distance on geometric elements with flat, parallel or cylindrical surfaces.
The culmination point is automatically entered on the bores and shafts - With memory function "max.", "min." and "max.-min." as dynamic measurement. The use of digital probe TESA IG-13 can also capture perpendicularity, rectitude and parallelism differences, as well as errors of radial and axial runout. Operating results in accordance with ISO 1101.
State-of-the-art concept associated with a high-quality design is the fruit of years of experience in the manufacture of electronic height gauges.
Ideal for dimensional inspection close to the manufacturing cell. No cumbersome cables to clutter up the working area.
Fast, simple and reliable probing of the workpiece or holes, especially.
3 main gauges available with either a 365, 615 or 920 mm measuring span.
Numerical display to 0,0005, 0,001, 0,01 and 0,1 mm, or equivalent inch units.
Extremely accurate measuring of deviations from length, straightness and perpendicularity due to the automatic correction of the bias errors through CAA (Computer Aided Accuracy).
Coefficient of linear expansion identical to steel (11,5 x 10-6 K-1).
POWER PANEL for value processing and output with interactive display to guide the operator.
No manual calculation.
99 workpiece oriented measurement cycles, programmable. Each cycle includes a number of 64 features with related limits of size.
Built-in printer for result output or possible use of an external printer unit to get a hard copy in A4 format.
RS232 data output.
Every height gauge comes with a SCS calibration certificate.
Consists of:
00760141 Rechargeable battery pack
00760142 Electric pump for creating the air-cushion beneath the gauge base, already mounted
00760143 Standard probe insert holder
00760150 Master piece for establishing the probe constant, nominal dimension to 20,000 mm / 0.78740 in
Dust cover
00760227 Standard probe insert with shank and 5 mm dia. ball tip in tungsten carbide