TESA MICRO-HITE 350/600/900 PLUS M

All TESA MICRO-HITE plus M height gauges are unique in that they have exceptional
metrological capabilities and can be used intuitively with ease. The revolutionary rotary
power control combines the speed of the manual concept with the precision of
the motorised one. With their robust and stand-alone design, these electronic height gauges are optimally suited for use on the shop floor as in the inspection laboratory.
Measure lengths in the form of internal,external, height, depth or distance dimensions
of geometrical part features having either a plane, parallel or cylindrical surface, whether
in one or two coordinate directions – Determine the position of bores in two coordinate
directions with output in both Polar and Cartesian (rectangular) coordinates – Mechani -
cally adjusted at our plant based on a patented TESA's method used to verify the correct position of the guiding column against the gauge base. This method allows any bias error to be easily and quickly detected by means of a lever-type dial indicator – Check deviations from straightness or parallelism according to ISO 1101 when used in conjunction with TESA IG-13 linked to the Power panel plus M.

• Modular design descending from the successful TESA MICRO-HITE dynasty.
Also equipped with the unique rotary power control located close to the rugged base.
This feature serves for guiding the column that moves on a cushion of air, commanding
fast motion of the probe insert and triggering all main measuring functions. Its intuitive
use allows accurate, easy handling of the column. A simple rotation causes the measuring head to move rapidly, approach the contact point quickly or slowly, probe up -ward or downward or execute bore measurement.
• Available in three sizes with measuring span of 365, 615 or 920 mm.
• Choice of three control panels for value processing and output.
• Metric and inch LC display with a resolution to 0,0001 and 0,001 mm, or inch equivalent.
• Autonomous run through batteries. No cumbersome cable.
• Built-in air bearing for easy displacement over the surface plate.
• Motorised measuring head for fast, accurate probing at each contact point with a
constant measuring force.
• TESA μ system for matchless reliability and simplicity.
• High precision through CAA (Computer Aided Accuracy). All correction values stored
in the memory still add to the mechanical precision.
• Coefficient of linear expansion matching that of steel (11,5 x 10-6 K-1).
• RS 232 data output.
• SCS calibration certificate delivered with
every height gauge.

Each height gauge is supplied with the following standard accessories:

00760143 Standard insert holder

00760062 Standard probe insert with a 5mm ball dia. ball tip

00760219 Master Piece for establishing the probe constant, nominal dimension to 6.350mm/0.2500in

00760142 Electric pump for creating the air-cushion beneath the gauge base.

00760141 Battery Pack

04761054 Mains adapter, 100 - 240V ac/ 50-60 Hz

04761055 Cable EU for mains adapter

04761056 Cable US for mains adapter

00760151-3 Dust Cover