Height Gauges - Height Gauges Section - TESA-�HITE - with Power Panel plus M

TESA-µHITE - with Power Panel plus M

TESA-�HITE - with Power Panel plus M

 TESA-µHITE height gauge -plus M Version ( apps range: 0-160mm / 0-6.3 in)

Provided with the following components (MUST BE ORDERED UNDER 3 POSITIONS) - 00760203 and 00760221 and S07010288 (see below)

Capable to operate using all TESA POWER PANEL plus M measuring functions, those  for perpendicularity measurement excepted.

Compact design with measuring stand included - Sensor equipped with a system for coaxial measuring according to the Abbe principle or using an offset probe relative to the gauge axis.  Measures internal, external, height, depth, step and distance dimensions on geometric elements having either a flat, parallel or cylindrical surface. - Automatic detection of the culminating point on bores or shafts - dynamic probing with memory functions «max.», «min.» «max.- min.». The whole system provides the best solution for measuring straightness, flatness and parallelism or inspecting axial and radial runouts depending on the chosen tool configuration.

  • Ideal for workpiece inspection close to the production area
  • 100 mm measuring span.
  • 0.001 mm and 0.0001 mm or 0.0001 in and 0.00001 in scales intervals
  • Max. perm. error as low as 2 µm (or 1µm when checking coaxiality).
  • Integrated temperature sensor so that the coefficient of linear expansion of each gauge unit matches that of steel ( 11,5 x 10-6  K-1 ).
  • Motorised measuring head for fast probing at each point.
  • Automatic value capture, controlled over the stability of the measuring force, but also all measured values.
  • Constant measuring force through the motor-driven actuator. Switchable.
  • No manual calculation needed.
  • RS 232 data output with direct connection to TESA PRINTER SPC.
  • Memory capacity for 99 single values.

Also included:

00730050  1 TESA-µHITE value sensor  Range 100mm / 4 in

00760191  1 Connecting cable for TESA-µHITE to control panel

00760195  1 Axial insert holder with M2.5 thread

03510002  1  Insert with a 3 mm dia. tungsten carbide ball tip

00760197  1 Insert with a 5 mm dia. tungsten carbide ball tip, offset

00760192  1 Master piece for establishing probe constant, nominal dimension 10 mm / 0.39370

04761054  1 Mains adapter 110 to 240Vac/50 to 60 Hz

04761055  1 Cable EU for mains adapter

04761056  1 Cable US for mains adapter

038407     1 Suited plastic case

No. Description Price (£) Qty
00760203 1 TESA measuring support, granite table, 200 x 300 x 50 mm (large-size support No. S07600163 can alternately also be used)893.00- +
00760221 1 POWER PANEL plus M. (can alternately also be used with host printer No. 00760220)712.00- +
S07010288 1 TESA µHITE electronic length measuring unit, without control panel2497.00- +
00730050 1 TESA µHite value sensor - (100mm / 4 in)1903.00- +
00760191 1 Cable for connecting TESA-µ Hite to control panel103.00- +
00760195 1 Probe insert holder, axial for probe inserts with a M2.5 thread55.00- +
03510002 1 Probe insert with a 3mm dia. tungsten carbide ball tip7.00- +
00760197 1 Probe insert with a 5mm dia. tungsten carbide ball tip, offset90.00- +
00760192 1 Master piece for establishing the probe constant, nominal dimension 10mm /0.39370463.00- +
04761054 1 Mains adapter 100 to 240 Vac/50 to 60 Hz51.00- +
04761055 1 Cable EU for mains adapter6.80- +
04761056 1 Cable US for mains adapter6.80- +
TESA-µHITE - with Power Panel plus M
Optional Accessories
00760186 Set of special measuring inserts (M27) 631.00 - +
00760194 Axial probe holder for measuring inserts with a M1,4 thread 55.00 - +
00760196 Axial probe holder for measuring inserts with a M3 thread 55.00 - +
00760198 Radial probe holder with a 4 mm dia. mounting bore. 82.00 - +
00760199 Universal insert holder with a 4 mm dia. fixing shank (used together with radial probe holder No. 00760198). M1,4 and M2,5 threads (2 x 2) for the measuring inserts. 125.00 - +
00760200 Measuring insert with a 5 mm dia. tungsten carbide ball tip. Also with 4 mm dia. fixing shank for use with radial probe holder No.00760198. 55.00 - +
00760201 Measuring insert with a 3 mm dia. tungsten carbide ball tip. Also with 4 mm dia. fixing shank for use with radial probe holder No.00760198. 91.00 - +
04768001 Foot switch for triggering data transfer or letting a measuring function be repeated 179.00 - +
00760207 Swivel support for control panel 33.00 - +
00760202 Spare batteries for control panel No.00760204, 6 Vdc/1.2 Ah 74.00 - +

People who viewed this product also bought these items.

TESA-µHITE - with Power Panel plus M TESA-�HITE Height Gauge More Information